Terms and conditions
Your use of this site indicates your acceptance of these terms and conditions. Your placement of an order indicates your acceptance of these terms and conditions. Your submittal of any purchase order to open-daq.com indicates acceptance of these terms and conditions. These terms and conditions shall supercede any subsequent terms or conditions included with any purchase order, whether or not such terms or conditions are signed by INGEN10 Ingenieria SL. INGEN10 reserves the right to make changes to this site and these terms and conditions at any time.
1. - INTRODUCTION:
Use of this site as well as the services it offers are the user, implies full and unreserved acceptance of each and every one of the conditions contained in this Legal Notice (hereinafter the "General Conditions "), so the user should be aware of the importance of reading each time you visit the Site. By accessing the Website implies knowledge and acceptance of the following terms and conditions so INGEN10 recommends users to print or download them and read them carefully each time you access the Site.
2. - GENERAL INFORMATION:
In compliance with the reporting obligations contained in Article 10 of Law 34/2002, of July 11, Services Information Society and Electronic Commerce, below reflect the following:
INGEN10 Ingenieria SL is a company whose registered office is located at C/Secundino Roces Riera 1, 33428 Llanera-Asturias (SPAIN), and which legal identification number is ESB33929464, and phone +34685997790.
The email contact is: firstname.lastname@example.org and web address: www.open-daq.com.
3. - USE OF SITE:
By accepting these Terms you agree to use the Website and the services it provides in the way, in the manner and form in which they are established. Users may not use this Site and its services for illegal and/or contrary to the purposes stated in these Terms and Conditions, which may be detrimental to the rights and / or interests of others or in any way damage the Website or fail to work or services that it offers or offered in the future.
4. - SCOPE OF THE SITE. USER RESPONSIBILITY:
Access to this site is the sole responsibility of the users. The risks arising from the use of the Site by the user shall be their sole and exclusive responsibility. Open-Instruments shall provide no responsibility for:
(I) the infallibility, availability, continuity, absence of defects or safety of the Site;
(II) the content of the Site or the information passing through it are free of viruses or other harmful elements such as errors, omissions or inaccuracies;
(III) the safe use that the user of the Website; INGEN10 not be liable for any loss or damage that may arise from interferences, omissions, interruptions, computer viruses, telephone faults or disconnections in the operational functioning of this electronic system due to causes unrelated to INGEN10 delays or blockages in the use of this electronic system caused by deficiencies or overloading of its Data Processing Centre, telephone lines, the Internet system or other electronic systems, nor for any damage that may be caused by third parties through illegal beyond the control of INGEN10.
It also exempts INGEN10 liability for any loss or damage you may suffer as a result of errors, defects or omissions in the information provided by INGEN10 provided from outside sources.
Mere access to the Site does not imply any kind of commercial relationship between the user and Open-Instruments.
5. - UPDATING AND MODIFICATION OF INFORMATION:
The information on this site is accurate at the date of the last update. INGEN10 reserves the right to update, modify or delete information on this site, and may limit or deny access. INGEN10 reserves the right to make, at any time, changes and modifications deemed desirable, may exercise this right at any time and without notice.
6. - CONTENTS:
INGEN10 makes every effort to avoid any mistake in the contents appearing on this Site. INGEN10 not warrant, or accept responsibility for the consequences that may result from errors in the contents appearing on the Website provided by others. INGEN10 will be not responsible in any way for the contents, commercial activities, products and services that can be viewed through electronic links (links) if any and when available, directly or indirectly, through this Site. The presence of links on the site open-daq.com, unless expressly stated otherwise, is for informational purposes only and in no way a suggestion, invitation or recommendation thereof. These links do not represent any kind of relationship between INGEN10 and companies or persons that the websites that can be accessed through these links. INGEN10 reserves the right to withdraw unilaterally and at any time and without notice the link from its Website. INGEN10 reserves the right to prevent or prohibit access to the Site to any Internet user to enter this site any content contrary to legal or moral standards, reserving the right to take legal action it deems necessary to prevent this type of behaviors.
7. - NAVIGATION, access and security:
INGEN10 makes every effort to ensure that browsing takes place under optimum conditions and to avoid any type of damage that may occur during the same. INGEN10 will not be liable for damages of any kind that may be caused to users by using other browsers or different versions of the browsers for which the site is designed.
In the event a product is listed at an incorrect price or with incorrect information due to typographical error or error in pricing or product information received from our suppliers, OpenDAQ shall have the right to refuse or cancel any orders placed for product listed at the incorrect price. OpenDAQ shall have the right to refuse or cancel any such orders whether or not the order has been confirmed and your credit card charged. If your credit card has already been charged for the purchase and your order is canceled, OpenDAQ shall immediately issue a credit to your credit card account in the amount of the charge.
9. - LINKS:
This site may contain links to other sites on the Internet that are owned and operated by third parties. You acknowledge that OpenDAQ is not responsible for the operation of or content located on or through any such site.
10. - INTELLECTUAL PROPERTY AND COPYRIGHT
Open-Instruments declares that unless otherwise indicated in the Site, text, images, illustrations, designs, icons, photographs, video clips, sound clips and other materials found on the Site and any other intellectual creations and/or inventions or scientific and technical discoveries, whatever their commercial or industrial application (hereinafter collectively called the "Content") are created or invented by INGEN10 or transferred, licensed, transmitted or authorized by the owners and/or assigns.
The User agrees not to remove or alter any distinctive sign used on the Site, including, but not be limited, brand names, trademarks (graphics, logos, etc), the "copyright" and other data identifying the rights of INGEN10 or third parties on the Website.
You may not use the name, trademarks, symbols, logos or distinctive signs of ownership by openDAQ without the express written consent of the latter.
In the event that any user or third party considers that any of the content on the site is in violation of copyright or other rights of intellectual property protection, please notify us at the following address: email@example.com.
11. - HIGH RISK ACTIVITIES
The Products sold in this web site are not fault-tolerant and are not designed or intended for use in hazardous environments requiring fail-safe performance, including without limitation, in the operation of nuclear facilities, aircraft navigation or communication systems, air traffic control, weapons systems, medical devices, direct life-support machines, or any other application in which the failure of the Product could lead directly to death, personal injury, or severe physical or property damage (collectively, "High Risk Activities"). The Company expressly disclaims any express or implied warranty of fitness for High Risk Activities.
12. – DISCLAIMER AND LIMITATION OF LIABILITY
The www.open-daq.com web sites and the materials therein are provided “as is”. INGEN10 makes no representations or warranties, either express or implied, of any kind with respect to the www.open-daq.com sites, their operations, contents, information or materials. OpenDAQ expressly disclaims all warranties, express or implied, of any kind with respect to the sites or their use, including but not limited to merchantability and fitness for a particular purpose. You agree that INGEN10 its directors, officers, employees or other representatives shall not be liable for damages arising from the operation, content or use of the www.open-daq.com site. You agree that this limitation of liability is comprehensive and applies to all damages of any kind, including without limitation direct, indirect, compensatory, special, incidental, punitive and consequential damages.
13. - JURISDICTION AND LAW: